Vintage Electro Voice
Vintage Electro Voice

Will this element work good in my vintage Electro Voice 911 Microphone?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260536124135&ssPageName=ADME:X:RTQ:US:1123
This next link shows a EV 911 with a pic of the element inside"
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130359960096&ssPageName=STRK:MEWAX:IT
Any help on finding a right fit is appreciated!
depends on what you mean by a "right fit". ceramic elements have entirely different characteristics from crystal elements.
crystal elements were used with tube amplifiers. they put out maybe 100 - 200 mv into a very high impedence load, usually over 1 megohm minimum. if this is the type equipment you have, then the ceramic element won't be very useful as its output voltage is only 10 - 20 mv but into a lower impedence, usually about 50 k ohms.
![]() |
![]() VINTAGE ELECTRO-VOICE 664 MICROPHONE US $25.00
|
![]() Vintage Electro Voice 2230 Equalizer US $35.00
|
![]() VINTAGE Electro Voice Stereo FR12-2 Speaker 12" PAIR US $17.50
|
![]() EV Electrovoice Sentry 1A Studio Monitor VINTAGE! SP12B/T35/1A Xover NM!! US $.01
|
![]() Vintage Electro Voice, Sony, Electret Microphones US $25.00
|
![]() Vintage Electro Voice Model 719 Microphone US $25.00
|
![]() Vintage Electro Voice Model 630 US $100.00
|
![]() Vintage electrovoice hiz microphone type 630 US $25.00
|
![]() Vintage Electro-Voice Dynamic Cardioid Micrphone, Model 664. US $29.99
|
![]() Vintage Electro-Voice CB Base Microphone US $29.99
|
![]() VINTAGE ELECTRO VOICE model 649B lapelle microphone US $19.99
|
| Powered by phpBay Pro |


US $9.99










































